Usage: | Fertilization, Irrigation |
---|---|
Type: | Water Tank |
Power Source: | Pressure |
Main Material: | Stainless Steel |
Capacity: | >1000L |
Sprinkler Installation Type: | Agriculture |
Customization: |
---|
Suppliers with verified business licenses
factory directly supply stainless steel water tank
Size
Application
• Suitable for cosmetic, medicine, food, chemical, dyeing, printing ink and other industrial production, especially for high matrix viscosity, solid material content higher material preparation emulsion will be more efficacy.
Design Parameter
Design pressure:Tank body according to the customers' requirements(0.02MPa~0.8MPa)
Jacket according to the customers' requirements(0.02MPa~0.5MPa)
Design temperature:Tank body, Jackets according to the customers' requirements(0ºC~160ºC)
Surface Finish
Finish type: Mechanical polishing, electrolytic polishing,Sand blasting, pickling
Polishing precision:Inner wall 0.4μm,Outer wall 0.6μm
Material
Inner tank:304,316L
Jacket:304
Installation
1) Determine the installation location center and water outlet
2) Install the perimeter steel plate according to the drawn circle line
3) After assembling the bottom and aligning, press the second layer and the third layer in turn (Attention: half of the board if staggered between the layers)
4) About the top layer, seal along the top rubber edge.
5)Install the bottom spout guard
6) The inner layer of the water tank is lined with adhesive lining
7) Find the correct position of the water outlet and install the internal impermeable membrane
8) Connect the outlet pipe to the water outlet
9) The top edge of the impermeable membrane is turned outwards and the inside is leveled.
10) Thread the rope along the hole as shown and tighten it in the groove of the wave plate.
Suppliers with verified business licenses