Hot Galvanized Steel Frame Structure for Greenhouse/Hot Sale

• Usage: Production Greenhouse
• Size: Large
• Cover Material: Various
• Layer: Various
• Warranty: 15 Years
• Length: Customerized
• Model NO.: jsyg-w-91
• Application: Steel Workshop, Steel Structure Platform, Steel Fa
• Transport Package: Sea Worthy
• Specification: standardized or customerized
• Trademark: Sunshine Greenhouse
• Origin: China
• HS Code: 94069000
• Production Capacity: 100000m2

Product Description

Product Description

For structure, usually, we used hot galvanized steel pipe, it's the best steel material, and can be used for 20 years without rusting.

/ Galvanzied steel pipe has the advantages of uniform coating, strong adhesion and long service life. The base of the galvanized pipe and the molten plating solution undergo complex physical and chemical reactions to form a corrosion-resistant zinc-iron alloy layer with a tight structure. The alloy layer is integrated with the pure zinc layer and the steel pipe substrate. Therefore, its corrosion resistance is strong.

/ As long as the forming angle is changed, steel pipes of various calibers can be produced with the same width of strip steel, which is easy to adjust the shape.

/ Because it is formed by continuous bending, the fixed length of the spiral tube is not limited, and the length can be arbitrarily set.

Steel structure film green house
Steel frame size: length of every 4 / 5m for an interval, a width of 9.6 meters or 8 meters or 6.4 meters as a standard unit (if the customer has special requirements, can make special design), the column height is 3.0 meters or 3.5 meters or 4 meters ;
All the steel structure of the greenhouse are hot dip galvanized, zinc rate not less than 350g / m2 ,so even in high humidity environment is not easy to rust. The main materials include angle steel, square tube, round tube, U-shaped steel, C-shaped steel.

The covering materials for roof and wall is PEP film,features are anti-UV and dust proof.  






Prefabricated industrial steel structure frame workshop are grouped by H section steel ,angle steel,round steel and C section steel,the design features of this workshop is the angle steel roof truss,t his kind of roof truss good at large span and light weight,save many tonnage of steel,please check more photoes as follow  :

Steel warehouse is the third generation construction. It combines H section and c/z section into the frame with the profiled steel sheet or sandwich panel as the wal and roof. The traditional reinforced concrete construction has aready been taken place by this kind of construction in developed contries. It has many excellent charateristics such as light weight, larger span, less marerial, low cost, less foundation, short building cycle, safe, beautiful, ect. It is widely used in single industrial factory, warehouse, business construction, office, parking lots, residence and so on.

 

STEEL STRUCTURE MEMBERS PRODUCTION (Fabrication) PROCESS :

1. Prepair raw materials : cut steel plate or use internation size H section steel and angle steel,round tube,round steel,square tube etc.;

2. Assembly and welding: our welders will follow the drawings to assembe the steel members and weld them together as a entire beam/column/brace and so on; (Our quality inspector will check the steel pieces after finish welding,this is the first quality check)

3. Sand blast : After finish welding and polishiing,our sand blast effect can reach internation 2.5 high grade,very good for resist rust; (Secondary quality check)

4.Paint : Within 2 hours after sand blast,all the steel members should be paint. Client can choose any color and any brand of paint. (The third quality check)

5. Inspect the goods by client : After we finish a part of fabrication work,we will invite clients to check the goods before we pack the steel frame.

6.Packing and loading : If clients require us to load the goods by close containers,we will pack the steel structure members one by one on the steel skid and tie the whole steel package well. (The fourth quality check )





General materials for whole steel building:
 

General materials for whole steel construction	1.Main steel structure frame:	Square tube,H section steel or welded by steel plate (Q235/Q345)
	2.Secondary steel frame:	Angle steel,round steel,round tube,square tube,C section steel (Q235/Q345)
	3.Embedded pieces and accessories:	High strength bolot,purlin-screw,common screw,self-threading pin,pull rod etc.
	4.Paint	Alkyd paint,zinc rich epoxy primer(anti- rust).Foreign client usually use "Jotun" and "Hempel".
	5.Gutter:	Color steel sheet,galvanized steel,stainless steel.
	6.Rainspout:	PVC
	7.Roof panel:	Single steel sheet;EPS/rock wool/polyurethane panel,the thickness of steel sheet depended on client
	8.Wall panel:	Single steel sheet;EPS/rock wool/polyurethane/Mgo panel,the thickness of steel sheet depended on client
	9.Roof ridge:	Color steel sheet (0.426mm/0.476mm/0.5mm)
	10.Trimming:	Color steel sheet (0.426mm/0.476mm/0.5mm)
	11.Door:	Roller shutter door/silding door/steel door/stainless door/sandwich panel door etc.
	12.Window:	PVC/aluminium window (silding/fix)
	13.Others:	Light tile,ventilator,exhaust fan and so on.

Our products available in stock:
 

Product Name	Size
Hot Galvanzied steel round tube	Φ20*2.0mm,L=6000mm
Hot Galvanzied steel round tube	Φ20*1.5mm,L=6000mm
Hot Galvanzied steel round tube	Φ25*2.0mm,L=6000mm
Hot Galvanzied steel round tube	Φ25*1.5mm,L=6000mm
Hot Galvanzied steel round tube	Φ32*2.0mm,L=6000mm
Hot Galvanzied steel round tube	Φ32*1.5mm,L=6000mm
Hot Galvanzied steel round tube	Φ48*2.0mm,L=6000mm
Hot Galvanzied steel round tube	Φ48*1.5mm,L=6000mm
Hot Galvanzied steel round tube	Φ60*2.0mm,L=6000mm
Hot Galvanzied steel round tube	Φ60*1.5mm,L=6000mm
Hot Galvanzied steel square tube	60*60*2.0mm,L=6000mm
Hot Galvanzied steel square tube	60*60*1.5mm,L=6000mm
Hot Galvanzied steel square tube	50*50*2.0mm,L=6000mm
Hot Galvanzied steel square tube	50*50*1.5mm,L=6000mm
Hot Galvanzied steel square tube	40*40*2.0mm,L=6000mm
Hot Galvanzied steel square tube	40*40*1.5mm,L=6000mm
Hot Galvanzied steel rectangular tube	70*50*2.0mm,L=6000mm
Hot Galvanzied steel rectangular tube	70*50*1.5mm,L=6000mm
Hot Galvanzied steel rectangular tube	60*40*2.0mm,L=6000mm
Hot Galvanzied steel rectangular tube	60*40*1.5mm,L=6000mm
Hot Galvanzied steel rectangular tube	50*30*2.0mm,L=6000mm
Hot Galvanzied steel rectangular tube	50*30*1.5mm,L=6000mm

 

Company Profile